contact us
home
suppliers
products
solutions
about us
sitemap
news
C-W DS
DJB
Emhiser
GRAS
Haigh-Farr
Norsonic
Prosig
SDSy
Sensonor

DJB Instruments - popular options

in with the 'popular' crowd

IEPE: mono + tri-axial

charge: mono + tri-axial

ultra-high temperature

seismic + sonde

high SHOCK

industrial IEPE + Piezo

charge dynamic pressure

DC MEMS accelerometers

hammers + calibration

amplifiers: charge + IEPE

accessories - incl. custom cabling

popular DJB accelerometers – likely to meet many/most needs!

A/120  (IEPE)

general purpose - mono-axial

AT/14  (IEPE)

IEPE general purpose - tri-axial

Sensitivity:  10mV/g up to 1V/g 

Weight: 12.5-27gm

Size (mm): 14.3 (A/F) x 19-21.5

Temp range: -50°C to 125°C (185°C HT)

Connector:  10-32 UNF Microdot, TNC

Sensing Element: Konic Shear® Piezo-Ceramic

Mounting: Base tapped 10-32 UNF 4mm deep

Note: available in multiple variants (click for info)

Sensitivity:  1mV/g up to 200mV/g

Weight:  13-16.6gm

Size (mm):  16.4 x 16.4 x 12-15.3

Temp range:  -50°C to 125°C (185°C HT)

Connector:  4-Pin ¼-28 UNF

Sensing Element:  Konic Shear® Piezo-Ceramic

Mounting:  Adhesive, Base tapped 10-32 UNF

Note: available in multiple variants (click for info)

A/20  (Charge)

general purpose - monoaxial

AT/04  (Charge)

IEPE general purpose - triaxial

Sensitivity:  30 pC/g nom.

Weight:  12.5gm - 27gm 

Size (mm):  14.3 (A/F) x 16.6-19.2

Temp range:  -50°C to 250°C

Connector:  10-32 UNF Microdot, TNC

Sensing Element:  Konic Shear® Piezo-Ceramic

Mounting:  Base tapped 10-32 UNF x 4mm deep

Note: available in multiple variants (click for info)

Sensitivity:  5 pC/g nom. 

Weight:  13-16.6gm

Size (mm):  16.4 x 16.4 x 12.1-15.3

Temp range:  -50°C to 200°C

Connector:  4 pin ¼-28UNF

Sensing Element:  Konic Shear® Piezo-Ceramic

Mounting: Adhesive, 10-32UNF Base tapped

Note: available in multiple variants (click for info)

in-line charge amplifiers - IEPE powered

QV/02  (Line driver)*

Hybrid Two Wire IEPE Source

QV/04  (Line Driver)*

Hybrid Two Wire IEPE Source

Weight:  20.5g

Dimensions:  Ø15 x 47.5

IEPE:  Miniature 2 Wire Charge/Voltage Converter

Connector:  input 10-32 UNF Microdot  output BNC

Gain options:  0.1, 1 and 10 mV/pC

Note: get the best of both worlds (charge amplification AND IEPE), for use with one channel piezo charge accelerometer such as AT/20 or AT/04 (has male BNC for direct connection)

Weight:  15g

Dimensions:  Ø12.5 x 28.5

IEPE:  Miniature 2 Wire Charge/Voltage Converter

Connector:  input 10-32 UNF Microdot  output 10-32 UNF Microdot

Gain options:  0.1, 1 and 10 mV/pC

Note: get the best of both worlds (charge amplification AND IEPE), for use with one channel piezo charge accelerometer such as AT/20 or AT/04 (has microdot in-line connection)

* in-line converters providing charge/voltage conversion when supplied with a standard IEPE supply current in the range of 4 to 20mA.  The low impedance line drive maintains signal integrity even over distances of several hundred metres, requiring minimal configuration to interface with vibration analysers/data acquisition systems.

go to:

conditioning power supply

ETMC Technologies Pty Ltd 

Suite 1A,  Level 2  |  802 Pacific Hwy

Gordon NSW 2072  |  AUSTRALIA

p: +61 2 9555 1225

f: +61 2 8014 5198

e: contact@etmc.com.au

  © 2009-2020   ETMC Technologies Pty Ltd | All rights reserved

This page is best viewed with browsers set to at least 960 pixels wide.         Please report problems or bad links to webmaster.         Click here for site map.