ETMC Technologies
agencies products solutions about us site map contact us news
    home   >   our agencies   >   ZODIAC data systems   >   modular NVH and industrial data acquisition systems  
Our Agencies

Zodiac Data System
 
Click here (or on logo) to go to ZODIAC Data Systems web site.
 

NVH and Industrial Application
 

The HEIM DATaRec® 4 series is one of the first distributed measuring systems in the field of dynamic measuring technology for data recording in mobile as well as in stationary applications. This gives you great flexibility in how your structure your systems. You are able to quickly adjust channel counts and configurations to give you the optimum in efficient data acquisition for NVH and other Industrial Applications:

Low no. of Channels
One-module system
linked directly via
USB to a PC

Compact System
Central measuring system
with a maximum of
192 channels

Distributed System
With cable length of up to
100m and a maximum
of 192 channels

Multi-channel System
Distributed system with more
than 1,000 channels, acquisition nodes can be up to 500m apart

A further advantage of the distributed architecture is that signal modules can be positioned as close as possible to the signal source to simplify cabling and avoid any disruptions or interference.

The DATaRec® 4 family provides you with a comprehensive range of modules to meet your needs:

DATaRec® 4 - LINK Modules

The central unit for configuring a measurement system (in combination with DATaRec® 4 signal modules, power modules and storage units). It operates via standard interfaces such as SAS, 1 Gb Ethernet, USB 2.0 or IEEE1394b, the different link module variants support various operating modes such as front end, stand alone recording or UDP broadcasting.

Due to the high data processing speed of the link modules, the supported modes of operation can be used simultaneously and hence, can tap into unforeseen possibilities of use. Each variety of the link module supports at least 16 signal modules.

Click here or on the images below for more information.
 
 

LMF2FE
data rate 600 Mbit/s, interfaces: Gbit
Ethernet, USB 2.0, IEEE 1394b, up to 16
(384 channels) Signal modules, Front-end mode, UDP broadcast
 

LMF2FE+REC
data rate 600 Mbit/s, interfaces: Gbit Ethernet, USB 2.0, IEEE 1394b, up to 16 (384 channels) Signal modules, Front-end mode and standalone recording mode, UDP broadcast
 

LMF2FE+REC+LEMO
data rate 600 Mbit/s, interfaces: Gbit Ethernet, USB 2.0, IEEE 1394b, up to 16 (384 channels) Signal modules, contact remote input, time synchronisation, Front-end mode and standalone recording, UDP broadcast

 

LMF4FE
data rate 600 Mbit/s, interfaces: Gbit
Ethernet, USB 2.0, IEEE 1394b, up to 32
(768 channels) Signal modules, Front-end mode, UDP broadcast
 

LMF4FE+REC+LEMO
data rate 600 Mbit/s, interfaces: Gbit Ethernet, USB 2.0, IEEE 1394b, up to 32 (768 channels) Signal modules, contact remote input, time synchronisation, Front-end mode and standalone recording mode, UDP broadcast

  
 
DATaRec® 4 - SIGNAL Modules

These signal modules can be utilised as a stand alone USB front end or as a multi-channel recording system via the HEIM link bus and the HEIM link modules.
 
 

ANH100
2 analogue input channels +2 analogue
output channels, 25 MHz sample rate per channel, 8 or 16 bit resolution

ANH101
1 analogue input channel + 1 analogue
output channel, 75 MHz sample rate per channel, 8 or 16 bit resolution

CAN4
4 Channel CAN Bus
CAN 2.0A, CAN 2.0B (11 or 29 bit)
 
 

CAN4F
4 channel CAN Bus input channels
CAN 2.0A, CAN 2.0B (11 or 29 bit)
2 Flex Ray input channels
 

CHG6
6 charge input channels, 80 kHz bandwidth per channel, 24 Bit A/D converter, 2 pC - 10,000 pC peak, one channel can be used for rpm
 

DEBU
4 analogue/ICP® input channels, 80 kHz bandwidth per channel, 24 Bit Sigma / Delta A/D converter, dynamic range > 102 dB, one channel for rpm, + 2 AES / EBU input channels
 

DIC24
24 ICP®/analogue input channels, each channel isolated, 20 kHz bandwidth per channel, 24 Bit A/D converter, > 90 dB dynamic, rpm channel

DIC24DC
24 DC analogue input channels, each channel
isolated, 20 kHz bandwidth per channel,
24 Bit A/D converter, > 90 dB dynamic
 

DIC6B 2 HZ (BNC)
6 analogue/ICP® input channels, 80 kHz bandwidth per channel, 24 Bit Sigma / Delta A/D converter, dynamic range > 102 dB, range ±10 mVpeak to ±10 Vpeak, rpm channel
 

DIC6L 2 HZ (Lemo)
6 analogue/ICP® input channels, 80 kHz bandwidth per channel, 24 Bit Sigma / Delta A/D converter, dynamic range > 102 dB, range ±10 mVpeak to ±10 Vpeak, rpm channel
 
 
 

ETH100
2 Ethernet input or output channels
10 T, 100 T or 1 Gbit/s
 
 
 
 
 

MIC6
6 analogue/ICP® input channels, 80 kHz bandwidth/channel, 24 Bit Sigma/Delta A/D converter, dynamic range > 102 dB, input range: ±10 mVpeak to ±10 Vpeak, ICP® sensor support and 200V polarisation microphones, 22Hz analogue high pass filter switchable, rpm channel
 

OUT6
6 analogue output channels
200 kHz sample rate
 
 
 

SGU9
9 analogue galvanic isolated strain gauge
input channels, 25 kHz sampling rate per module, 24 Bit A/D converter, 1 mV to
10 V input range, half and full bridge support, 0.5 V to 10 V bridge power, rpm channel

VCR100
4 video input channels, 4 voice input channels, MPEG-2 compression, NTSC and PAL support
 
 
 

 

VCP100
4 video output channels, 8 voice output channels, MPEG-2 decompression, NTSC,
PAL and RGB support

   
 
DATaRec® 4 - STORAGE Modules

The HEIM DATaRec® 4 SMM module is the first choice when one wants to record data in rough conditions with a standalone recording mode.

There are various storage modules available to suit different applications.
 
 

SMM
The Link Module writes the collected data from the Signal Module directly to a storage device via USB 2.0 or IEEE 1394b interface.
(different capacities available)

    
 

Want to learn more?     Contact us or visit ZODIAC Data Systems web site.
 


 

Other ZODIAC Data Systems products:
ETMC Technologies Pty Ltd     Macarthur House, 8 Melville Street, Parramatta NSW 2150, AUSTRALIA
p: 02 9555 1225 (+61 2 9555 1225)     f: 02 8014 5198 (+61 2 8014 5198)     e: contact@etmc.com.au

    © 2009-2011,   ETMC Technologies Pty Ltd         All rights reserved

 
This page is best viewed with browsers set to at least 800 pixels wide.         Please report problems or bad links to webmaster.         Click here for site map.