ETMC Technologies
agencies products solutions about us site map contact us news
    home   >   our agencies   >   ACRA CONTROL   >   network switches  
Our Agencies

ACRA CONTROL logo
 
Click here (or on logo) to go to ACRA CONTROL web site.
 

Network Switches
 


ACRA CONTROL's rugged Ethernet switches are part of the NET-500 range and are specifically designed for the unique requirements experienced by aerospace networks.
 
These airborne Ethernet switches are deterministic, reliable and fast due to their hardwired switching design. Their rugged compact form allows them to survive the extreme conditions of aerospace environments.
 
Live at power-up, deterministic functionality eliminates boot-up delays and minimizes data loss from power outages.
 
ACRA CONTROL' s Xbar architecture facilitates flexible forwarding and filtering configurations e.g. to send data to multiple destinations for real-time monitoring, recording and transmission (currently available on the NET/SWI/003).
 
The synchronization of devices across a large distributed network is achieved to within 10s of nanoseconds - even under heavy network traffic conditions.
 
 

 
 

NET-500 : : Standalone switches
 

  NET/SWI/001

Extended temperature airborne 8-port Ethernet switch with IEEE 1588 time support

  NET/SWI/003

8-port Ethernet switch with configurable static forwarding and filtering

Click on images or contact us to learn more about these standalone ethernet switches.
 

These Ethernet switches are designed to operate in harsh environments. Up to eight full-duplex Ethernet end nodes can be connected to these switches using CAT5 copper cabling.
 
These ethernet switches have a store-and-forward switching architecture; incoming Ethernet frames are stored before they are forwarded out on the egress Ethernet port. Both 802.3 and Ethernet II 802.1Q tagged frames are supported.
 
The NET/SWI/001 transparently supports IEEE 1588v1 Precision Time Protocol (PTP) messages, while NET/SWI/003 has an embedded IEEE 1588v1 Precision Time Protocol Grandmaster. This provides a greater degree of synchronization accuracy than would be achieved using a non-1588 switch, even under heavy network traffic conditions.
 
Features include:
  • Eight-port Ethernet network switch with keyed Mighty Mouse connectors
     
  • 100BaseT or 1000BaseT (NET/SWI/003) or 100BaseT (NET/SWI/001) Fast Ethernet links over copper wiring with auto-MDIX
     
  • Store-and-forward operation
     
  • IEEE 1588v1 support with transparency mode of operation (NET/SWI/001) or Embedded IEEE 1588v1 Precision Time Protocol (PTP) Grandmaster and Transparency mode (NET/SWI/003)
     
  • Extended temperature operation (-55 to 105°C)
     
  • Live at power up (static internal routing; no MAC address learning time delays)
     
  • Applications
  • Airborne interconnection for data acquisition units and network data recorders in an Ethernet environment
     
  •  
     

    KAM-500 : : Switch modules
     

      KAD/SWI/101

    3-to-1 aggregator Ethernet switch module

      KAD/SWI/102

    4-port Ethernet switch module with a dedicated programming port

      KAD/SWI/103

    3-port Ethernet tap module

    Click on images or contact us to learn more about these ethernet switch modules.
     

    These KAM-500 modules are Ethernet switches designed for operating in harsh environments. Up to four full-duplex Ethernet end nodes can be connected to the switch using CAT5 copper cabling.
     
    These ethernet switches have a store-and-forward switching architecture; incoming Ethernet frames are stored before they are forwarded out on the egress
     
    Features include:
  • Four-port Ethernet network switch (KAD/SWI/101 and KAD/SWI/102) or a Three-port ethernet tap (KAD/SWI/103) using a standard 52-way double-density connector
     
  • 100BaseTX Ethernet links over copper wiring
     
  • Store-and-forward operation
     
  • IEEE 1588v1 support with transparency mode of operation
     
  • Live at power-up (static internal routing; no MAC address learning time delays)
     
  • Applications
  • Airborne interconnection for data acquisition units and network data recorders in an Ethernet environment
     
  • Want to learn more?     Click on the links, contact us or visit ACRA CONTROL web site.
    Data Acquisition

        KAM-500 Chassis

        KAM-500 Modules

        Software

    Recorders

        Multi-role Recorders

        Ethernet Recorders

        PCM Recorders

        Recording Media

    Network Switches

        Standalone Switches

        Switch Modules

    Ground Stations

        Boards

        Systems

        Software

    Applications

        Flight Test Instrumentation 

        Aircraft Data Recording

        Ground Data Processing

        Non-Flight Data Acquisition

        Space

        UAV

    More

        Support

        Knowledge Base

        Company

     

     
    ETMC Technologies Pty Ltd     Macarthur House, 8 Melville Street, Parramatta NSW 2150, AUSTRALIA
    p: 02 9555 1225 (+61 2 9555 1225)     f: 02 8014 5198 (+61 2 8014 5198)     e: contact@etmc.com.au

        © 2009-2012,   ETMC Technologies Pty Ltd         All rights reserved

     
    This page is best viewed with browsers set to at least 800 pixels wide.         Please report problems or bad links to webmaster.         Click here for site map.